• SMi 35 CO2 S-Mine - 3.0 - PLA - 0.2

  • $22.00 USD

  • Description

    Prototype 3D Printed CO2 powered S mine 35. Sold in unpainted silver PLA straight from the printer. Simply install a normal co2 cartridge and insert the bouncing part of the mine into the main body. Stepping on the mine will puncture the CO2 and launch the mine out of the body. It does not launch very high but it has enough pressure to pop well out of the ground and create enough noise and commotion to let someone know they just stepped on a mine. CO2 is much safer than many alternatives while also being easy and relatively cheap to reload. Price is for 1 mine, CO2 not included.

     

    This s-mine does have the correct threaded hole to accept a fuse, however it is not required to operate. I left the fuse out of this initial design as it would require you to bury the mine much deeper underground and the fuse would be a potential breaking point. If these prove to be fairly popular, I already have additional designs to allow for trip wires and pressure fuses. 

     

    Time to print: ~27 hours

  • SMi 35 CO2 S-Mine - 3.0 - PLA - 0.2
  • SMi 35 CO2 S-Mine - 3.0 - PLA - 0.2
  • SMi 35 CO2 S-Mine - 3.0 - PLA - 0.2
  • SMi 35 CO2 S-Mine - 3.0 - PLA - 0.2

Share this product