WE ARE OUT OF THE WHOLE ASSEMBLY. WE HAVE THE LEVER ONLY AVAILABLE AT THIS TIME!!
Reproduction safety lever assembly for the G43 or K43. Set includes 5 parts total. We also have just the safety levels available. Use the drop-down menu to choose between the entire assembly or just the safety lever by itself.
All parts were reproduced from originals. This safety and plunger are correct down to the tool marks and radii. Originals safeties can come off when the rifle runs over pressured, and are often lost. This can be tragic if you are reenacting with an original safety.
These levers are made from medium carbon steel and are very robust parts. The plunger is also made from medium carbon steel and is carburized for an outside surface hardness of approx. 40Rc.
The parts were matched in hardness as closely as possible to 3 original examples. The lever and plunger are treated in black oxide which will ensure long life of the parts and a finish that will hold.
The set includes 2 snap rings one metric and one standard. Use which ever one fits your weapon best. Also included is a new made spring with the same coils per inch, length,wire dia, and tension. The only real difference is these springs are plated spring steel and should perform a little better than originals.
How to identify this reproduction: This newest batch is not marked on the face as previous runs were. We simply left the very faint swirl marks that are on the shaft in the bent area. They are very faint and would take a magnifying glass to tell easily, but these marks will identify these as non-originals.